Bypassing Garage Door Sensors: A How-To Guide

Bypassing Garage Door Sensors: A How-To Guide

Bypassing Garage Door Sensors in 2020

Garage door openers have been required by industry regulations to include several safety mechanisms to protect against injury and property damage since the early 1990s. There are sensors to detect certain objects in the path when the garage door is closing. If they detect any object in the path of the closing door, they will prevent it from closing. Even with such security measures in place, bypassing garage door sensors isn’t difficult.

There are times when they prevent the garage door from closing properly even when nothing is blocking its path. That’s when you will need to bypass the garage door sensors to close the door. The best way to deal with this problem is to get a professional service like Garage Door Denver Metro to inspect the sensors and fix any issues they may be having.

 

How Do Garage Door Sensors Work?

Photo-eye sensors are the most popular type of garage door sensors installed on garage door openers these days. They will detect if anything is blocking the path of the garage door. If an object or a person blocks the path of the door, the sensor will prevent the door from closing – leaving it open until the object is cleared from its path.

An infrared light runs between the two photo eyes and when the path is blocked by an object or person, the light is interrupted and doesn’t run between each eye. The sensor won’t operate under such circumstances – leaving the garage door open until the path is clear. When the path is clear, the track and pulley system will lift and lower the door once you operate it with the remote.

Garage-Door-Openers Garage Door Denver Metro

 

Bypassing Garage Door Sensors

There are numerous ways of bypassing the sensor in the door. One way is to misalign the photo-eye sensor. That way, the sensor won’t work and you can easily bypass it. Walking above it is another way to bypass them. Since the sensors are positioned two inches above the ground, stepping a bit higher than two inches will help to bypass them. Pulling the emergency release code is another method of bypassing them. A slight pull on the emergency code will help disconnect the door’s trolley from the opener carriage.

 

Call Now For A Free Quote

If your garage door sensors are malfunctioning, you need to work with a professional service such as Garage Door Denver Metro to fix them. Call Garage Door Denver Metro at (720) 996-2046 today to fix your garage door sensor problems.


 

Summary
Bypassing Garage Door Sensors in 2020
Article Name
Bypassing Garage Door Sensors in 2020
Description
Garage door openers have been required by industry regulations to include several safety mechanisms to protect against injury and property damage since the early 1990s. There are sensors to detect certain objects in the path when the garage door is closing. If they detect any object in the path of the closing door, they will prevent it from closing.
Publisher Name
Garage Door Denver Metro LLC
Publisher Logo

Leave a Reply

Close Menu
Call Now ButtonCall us now